Pearl Exterior Emulsion

Covering Capacity 80-85 sqft./Itr/2 Coats    Finish Soft Sheen
Ingredient
Water 02         calcined clay cc5
Dirt Shield Latex dsle2         Cristobalite cb3
Titanium Dioxide to2r         Silicon sl7.5
Nepheline Syenite ns4        And Other Ingredients

TOKYO PAINTS :
"Pearl Finish "Exterior emulsion is 100% Latex silicon based exterior Emulsion is a product which is specially blended with feel modifier silicon and emulsions resulting a tough and strong film formulation which protect and decorate exterior walls against weather ,dirt ,dust and ultra violet rays.
USAGE:
Exterior walls, Brickwork, concrete & architectural buildings.
SURFACE PREPARATION:
First of all prepare a smooth and uniform surface. This can be done by scraping the old painted surface and removing the flaking particles, all the dirt or dust which is present on the surface.
MIXING :
Now stir the material and strain it before use. Now thin the paint with 25% to 30% of clean water by volume, but do not over thin. Apply at least Two to three coats for super finish with brush / Roller.
APPLICATION :
A brush ,roller or spray-gun can be used to apply paint. The equipment should be washed after use. RE COATING Let the coat dry. Leave it for 4 to 5 hours then apply another coat.
PRECAUTIONS :
Store the product in well ventilated location and away from the source of fire and ignition Use only with adequate ventilation. Do not take internally. Keep out of the reach of the children . Avoid contact with the skin, eye and breathing of vapours . Wash Hands thoroughly after handling especially before eating Keep container tightly closed and upright when not in use . Avoid conditions which results in formation of inhale able such as spraying or sanding painted surfaces. If such condition cannot be avoided, use appropriate respiratory protection.